top of page
All Analyzers are available in 3 types: Portable, Laboratory & Online
pH/ORP Analyzers
Portable ORP Meter
Weight - 55 g (typical)
Resolution - 0.1 pH
Ph Range - 0.0 to14.0 pH
Battery Life - 1000 Hours
Batteries - 4x1.5V (Toshiba LR44 or equivalent)
Dimension - 150L x 32W x 15H mm
Resolution - 0.1 pH
Ph Range - 0.0 to14.0 pH
Battery Life - 1000 Hours
Batteries - 4x1.5V (Toshiba LR44 or equivalent)
Dimension - 150L x 32W x 15H mm
Handheld and Portable pH Analyzer
Ambient temp range - 0 to 50 °C
pH calibration - 1 point,2 points or 3 points
pH temp. compensation - Auto from 0.0 to 99.9 °C
pH buffer recognition Selectable - (4.01,7,10.01) or (4.00,6.86,9.1)
Data storage capability - 50 data points
Power supply - 4x 1.5 V batteries
Display - 98 x 64 mm graphical LCD
pH calibration - 1 point,2 points or 3 points
pH temp. compensation - Auto from 0.0 to 99.9 °C
pH buffer recognition Selectable - (4.01,7,10.01) or (4.00,6.86,9.1)
Data storage capability - 50 data points
Power supply - 4x 1.5 V batteries
Display - 98 x 64 mm graphical LCD
Benchtop pH Analyzer
Model - DP505
Accuracy - 0.01 pH +/- 1 digit
Frequency - 50 Hz
Voltage - 230 V
pH Range - 0.00 to 14.00 pH
Temperature Control 0 to 100 °C
Display - 4 digit LED
Accuracy - 0.01 pH +/- 1 digit
Frequency - 50 Hz
Voltage - 230 V
pH Range - 0.00 to 14.00 pH
Temperature Control 0 to 100 °C
Display - 4 digit LED
pH Electrodes
Ph Range - 0-14 (Na+ error at Greater than 12.3 pH)
Response - 95% in 1 second (bulb-type only), KCL Refill type (Cable 5M-Standard)
Teperature - 0-80 °C
Pressure - 5 bar
Offset - +/- 0.20 pH
Span - 97% of theoretical or higher
Response - 95% in 1 second (bulb-type only), KCL Refill type (Cable 5M-Standard)
Teperature - 0-80 °C
Pressure - 5 bar
Offset - +/- 0.20 pH
Span - 97% of theoretical or higher
pH Industrial Sensor
Measuring Range - 0 to 14 pH
Pressure Range - 0 to 6.9 bar (0 to 100 psig)
MNPT Process Connections - 1/2"
Temperature Range -5 to 80 °C
Response Time - 95% of reading in 10 seconds
Pressure Range - 0 to 6.9 bar (0 to 100 psig)
MNPT Process Connections - 1/2"
Temperature Range -5 to 80 °C
Response Time - 95% of reading in 10 seconds
26 mm Industrial PH Transmitter
Max Current - 200 mA
Max Voltage - 30 V DC
Span - 0 to 23 mA
Relay type - 2 Changeover contacts
Reference temperature 25 °C (77 Deg F)
Max panel thickness - 26 mm (1")
Max Voltage - 30 V DC
Span - 0 to 23 mA
Relay type - 2 Changeover contacts
Reference temperature 25 °C (77 Deg F)
Max panel thickness - 26 mm (1")
Benchtop PH Meter
Weight - 650 grams (Excluding batteries)
Display Type LCD
Dimensions - 165 x 230 x 80 mm
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Power Supply - 6 AA Batteries or 115/ 230 V AC adapter
DIN connector - 8 pin
Usage - Laboratory
Display Type LCD
Dimensions - 165 x 230 x 80 mm
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Power Supply - 6 AA Batteries or 115/ 230 V AC adapter
DIN connector - 8 pin
Usage - Laboratory
Industrial pH Transmitter
Voltage - 10 to 50 V
Measuring Range - 2 to 16 pH
Length of cable analogue - Max. 50 m (164.05 ft)
Temperature range - -50 to +150 °C (-58 to +302 F)
Length of cable digital - Max. 100 m (328.10 ft)
Power consumption - Max. 10 mA
Measuring Range - 2 to 16 pH
Length of cable analogue - Max. 50 m (164.05 ft)
Temperature range - -50 to +150 °C (-58 to +302 F)
Length of cable digital - Max. 100 m (328.10 ft)
Power consumption - Max. 10 mA
Portable ORP Meter
Weight - 55 g (typical)
Resolution - 0.1 pH
Ph Range - 0.0 to14.0 pH
Battery Life - 1000 Hours
Batteries - 4x1.5V (Toshiba LR44 or equivalent)
Dimension - 150L x 32W x 15H mm
Resolution - 0.1 pH
Ph Range - 0.0 to14.0 pH
Battery Life - 1000 Hours
Batteries - 4x1.5V (Toshiba LR44 or equivalent)
Dimension - 150L x 32W x 15H mm
Handheld and Portable pH Analyzer
Ambient temp range - 0 to 50 °C
pH calibration - 1 point,2 points or 3 points
pH temp. compensation - Auto from 0.0 to 99.9 °C
pH buffer recognition Selectable - (4.01,7,10.01) or (4.00,6.86,9.1)
Data storage capability - 50 data points
Power supply - 4x 1.5 V batteries
Display - 98 x 64 mm graphical LCD
pH calibration - 1 point,2 points or 3 points
pH temp. compensation - Auto from 0.0 to 99.9 °C
pH buffer recognition Selectable - (4.01,7,10.01) or (4.00,6.86,9.1)
Data storage capability - 50 data points
Power supply - 4x 1.5 V batteries
Display - 98 x 64 mm graphical LCD
Benchtop pH Analyzer
Model - DP505
Accuracy - 0.01 pH +/- 1 digit
Frequency - 50 Hz
Voltage - 230 V
pH Range - 0.00 to 14.00 pH
Temperature Control 0 to 100 °C
Display - 4 digit LED
Accuracy - 0.01 pH +/- 1 digit
Frequency - 50 Hz
Voltage - 230 V
pH Range - 0.00 to 14.00 pH
Temperature Control 0 to 100 °C
Display - 4 digit LED
pH Electrodes
Ph Range - 0-14 (Na+ error at Greater than 12.3 pH)
Response - 95% in 1 second (bulb-type only), KCL Refill type (Cable 5M-Standard)
Teperature - 0-80 °C
Pressure - 5 bar
Offset - +/- 0.20 pH
Span - 97% of theoretical or higher
Response - 95% in 1 second (bulb-type only), KCL Refill type (Cable 5M-Standard)
Teperature - 0-80 °C
Pressure - 5 bar
Offset - +/- 0.20 pH
Span - 97% of theoretical or higher
pH Industrial Sensor
Measuring Range - 0 to 14 pH
Pressure Range - 0 to 6.9 bar (0 to 100 psig)
MNPT Process Connections - 1/2"
Temperature Range -5 to 80 °C
Response Time - 95% of reading in 10 seconds
Pressure Range - 0 to 6.9 bar (0 to 100 psig)
MNPT Process Connections - 1/2"
Temperature Range -5 to 80 °C
Response Time - 95% of reading in 10 seconds
26 mm Industrial PH Transmitter
Max Current - 200 mA
Max Voltage - 30 V DC
Span - 0 to 23 mA
Relay type - 2 Changeover contacts
Reference temperature 25 °C (77 Deg F)
Max panel thickness - 26 mm (1")
Max Voltage - 30 V DC
Span - 0 to 23 mA
Relay type - 2 Changeover contacts
Reference temperature 25 °C (77 Deg F)
Max panel thickness - 26 mm (1")
Benchtop PH Meter
Weight - 650 grams (Excluding batteries)
Display Type LCD
Dimensions - 165 x 230 x 80 mm
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Power Supply - 6 AA Batteries or 115/ 230 V AC adapter
DIN connector - 8 pin
Usage - Laboratory
Display Type LCD
Dimensions - 165 x 230 x 80 mm
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Power Supply - 6 AA Batteries or 115/ 230 V AC adapter
DIN connector - 8 pin
Usage - Laboratory
Industrial pH Transmitter
Voltage - 10 to 50 V
Measuring Range - 2 to 16 pH
Length of cable analogue - Max. 50 m (164.05 ft)
Temperature range - -50 to +150 °C (-58 to +302 F)
Length of cable digital - Max. 100 m (328.10 ft)
Power consumption - Max. 10 mA
Measuring Range - 2 to 16 pH
Length of cable analogue - Max. 50 m (164.05 ft)
Temperature range - -50 to +150 °C (-58 to +302 F)
Length of cable digital - Max. 100 m (328.10 ft)
Power consumption - Max. 10 mA
Portable ORP Meter
Weight - 55 g (typical)
Resolution - 0.1 pH
Ph Range - 0.0 to14.0 pH
Battery Life - 1000 Hours
Batteries - 4x1.5V (Toshiba LR44 or equivalent)
Dimension - 150L x 32W x 15H mm
Resolution - 0.1 pH
Ph Range - 0.0 to14.0 pH
Battery Life - 1000 Hours
Batteries - 4x1.5V (Toshiba LR44 or equivalent)
Dimension - 150L x 32W x 15H mm
Handheld and Portable pH Analyzer
Ambient temp range - 0 to 50 °C
pH calibration - 1 point,2 points or 3 points
pH temp. compensation - Auto from 0.0 to 99.9 °C
pH buffer recognition Selectable - (4.01,7,10.01) or (4.00,6.86,9.1)
Data storage capability - 50 data points
Power supply - 4x 1.5 V batteries
Display - 98 x 64 mm graphical LCD
pH calibration - 1 point,2 points or 3 points
pH temp. compensation - Auto from 0.0 to 99.9 °C
pH buffer recognition Selectable - (4.01,7,10.01) or (4.00,6.86,9.1)
Data storage capability - 50 data points
Power supply - 4x 1.5 V batteries
Display - 98 x 64 mm graphical LCD
Benchtop pH Analyzer
Model - DP505
Accuracy - 0.01 pH +/- 1 digit
Frequency - 50 Hz
Voltage - 230 V
pH Range - 0.00 to 14.00 pH
Temperature Control 0 to 100 °C
Display - 4 digit LED
Accuracy - 0.01 pH +/- 1 digit
Frequency - 50 Hz
Voltage - 230 V
pH Range - 0.00 to 14.00 pH
Temperature Control 0 to 100 °C
Display - 4 digit LED
pH Electrodes
Ph Range - 0-14 (Na+ error at Greater than 12.3 pH)
Response - 95% in 1 second (bulb-type only), KCL Refill type (Cable 5M-Standard)
Teperature - 0-80 °C
Pressure - 5 bar
Offset - +/- 0.20 pH
Span - 97% of theoretical or higher
Response - 95% in 1 second (bulb-type only), KCL Refill type (Cable 5M-Standard)
Teperature - 0-80 °C
Pressure - 5 bar
Offset - +/- 0.20 pH
Span - 97% of theoretical or higher
pH Industrial Sensor
Measuring Range - 0 to 14 pH
Pressure Range - 0 to 6.9 bar (0 to 100 psig)
MNPT Process Connections - 1/2"
Temperature Range -5 to 80 °C
Response Time - 95% of reading in 10 seconds
Pressure Range - 0 to 6.9 bar (0 to 100 psig)
MNPT Process Connections - 1/2"
Temperature Range -5 to 80 °C
Response Time - 95% of reading in 10 seconds
26 mm Industrial PH Transmitter
Max Current - 200 mA
Max Voltage - 30 V DC
Span - 0 to 23 mA
Relay type - 2 Changeover contacts
Reference temperature 25 °C (77 Deg F)
Max panel thickness - 26 mm (1")
Max Voltage - 30 V DC
Span - 0 to 23 mA
Relay type - 2 Changeover contacts
Reference temperature 25 °C (77 Deg F)
Max panel thickness - 26 mm (1")
Benchtop PH Meter
Weight - 650 grams (Excluding batteries)
Display Type LCD
Dimensions - 165 x 230 x 80 mm
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Power Supply - 6 AA Batteries or 115/ 230 V AC adapter
DIN connector - 8 pin
Usage - Laboratory
Display Type LCD
Dimensions - 165 x 230 x 80 mm
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Power Supply - 6 AA Batteries or 115/ 230 V AC adapter
DIN connector - 8 pin
Usage - Laboratory
Industrial pH Transmitter
Voltage - 10 to 50 V
Measuring Range - 2 to 16 pH
Length of cable analogue - Max. 50 m (164.05 ft)
Temperature range - -50 to +150 °C (-58 to +302 F)
Length of cable digital - Max. 100 m (328.10 ft)
Power consumption - Max. 10 mA
Measuring Range - 2 to 16 pH
Length of cable analogue - Max. 50 m (164.05 ft)
Temperature range - -50 to +150 °C (-58 to +302 F)
Length of cable digital - Max. 100 m (328.10 ft)
Power consumption - Max. 10 mA
Portable ORP Meter
Weight - 55 g (typical)
Resolution - 0.1 pH
Ph Range - 0.0 to14.0 pH
Battery Life - 1000 Hours
Batteries - 4x1.5V (Toshiba LR44 or equivalent)
Dimension - 150L x 32W x 15H mm
Resolution - 0.1 pH
Ph Range - 0.0 to14.0 pH
Battery Life - 1000 Hours
Batteries - 4x1.5V (Toshiba LR44 or equivalent)
Dimension - 150L x 32W x 15H mm
Handheld and Portable pH Analyzer
Ambient temp range - 0 to 50 °C
pH calibration - 1 point,2 points or 3 points
pH temp. compensation - Auto from 0.0 to 99.9 °C
pH buffer recognition Selectable - (4.01,7,10.01) or (4.00,6.86,9.1)
Data storage capability - 50 data points
Power supply - 4x 1.5 V batteries
Display - 98 x 64 mm graphical LCD
pH calibration - 1 point,2 points or 3 points
pH temp. compensation - Auto from 0.0 to 99.9 °C
pH buffer recognition Selectable - (4.01,7,10.01) or (4.00,6.86,9.1)
Data storage capability - 50 data points
Power supply - 4x 1.5 V batteries
Display - 98 x 64 mm graphical LCD
Benchtop pH Analyzer
Model - DP505
Accuracy - 0.01 pH +/- 1 digit
Frequency - 50 Hz
Voltage - 230 V
pH Range - 0.00 to 14.00 pH
Temperature Control 0 to 100 °C
Display - 4 digit LED
Accuracy - 0.01 pH +/- 1 digit
Frequency - 50 Hz
Voltage - 230 V
pH Range - 0.00 to 14.00 pH
Temperature Control 0 to 100 °C
Display - 4 digit LED
pH Electrodes
Ph Range - 0-14 (Na+ error at Greater than 12.3 pH)
Response - 95% in 1 second (bulb-type only), KCL Refill type (Cable 5M-Standard)
Teperature - 0-80 °C
Pressure - 5 bar
Offset - +/- 0.20 pH
Span - 97% of theoretical or higher
Response - 95% in 1 second (bulb-type only), KCL Refill type (Cable 5M-Standard)
Teperature - 0-80 °C
Pressure - 5 bar
Offset - +/- 0.20 pH
Span - 97% of theoretical or higher
pH Industrial Sensor
Measuring Range - 0 to 14 pH
Pressure Range - 0 to 6.9 bar (0 to 100 psig)
MNPT Process Connections - 1/2"
Temperature Range -5 to 80 °C
Response Time - 95% of reading in 10 seconds
Pressure Range - 0 to 6.9 bar (0 to 100 psig)
MNPT Process Connections - 1/2"
Temperature Range -5 to 80 °C
Response Time - 95% of reading in 10 seconds
26 mm Industrial PH Transmitter
Max Current - 200 mA
Max Voltage - 30 V DC
Span - 0 to 23 mA
Relay type - 2 Changeover contacts
Reference temperature 25 °C (77 Deg F)
Max panel thickness - 26 mm (1")
Max Voltage - 30 V DC
Span - 0 to 23 mA
Relay type - 2 Changeover contacts
Reference temperature 25 °C (77 Deg F)
Max panel thickness - 26 mm (1")
Benchtop PH Meter
Weight - 650 grams (Excluding batteries)
Display Type LCD
Dimensions - 165 x 230 x 80 mm
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Power Supply - 6 AA Batteries or 115/ 230 V AC adapter
DIN connector - 8 pin
Usage - Laboratory
Display Type LCD
Dimensions - 165 x 230 x 80 mm
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Power Supply - 6 AA Batteries or 115/ 230 V AC adapter
DIN connector - 8 pin
Usage - Laboratory
Industrial pH Transmitter
Voltage - 10 to 50 V
Measuring Range - 2 to 16 pH
Length of cable analogue - Max. 50 m (164.05 ft)
Temperature range - -50 to +150 °C (-58 to +302 F)
Length of cable digital - Max. 100 m (328.10 ft)
Power consumption - Max. 10 mA
Measuring Range - 2 to 16 pH
Length of cable analogue - Max. 50 m (164.05 ft)
Temperature range - -50 to +150 °C (-58 to +302 F)
Length of cable digital - Max. 100 m (328.10 ft)
Power consumption - Max. 10 mA
Turbidity Analyzers
Digital Turbidity Meter
Accuracy - +/-1.0%fs
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Turbidity Sensor
Self Cleaning Sensor
Digital Turbidity Meter
Accuracy - +/-1.0%fs
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Turbidity Sensor
Self Cleaning Sensor
Digital Turbidity Meter
Accuracy - +/-1.0%fs
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Turbidity Sensor
Self Cleaning Sensor
Digital Turbidity Meter
Accuracy - +/-1.0%fs
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Turbidity Sensor
Self Cleaning Sensor
Digital Turbidity Meter
Accuracy - +/-1.0%fs
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Turbidity Sensor
Self Cleaning Sensor
Digital Turbidity Meter
Accuracy - +/-1.0%fs
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Turbidity Sensor
Self Cleaning Sensor
Digital Turbidity Meter
Accuracy - +/-1.0%fs
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Turbidity Sensor
Self Cleaning Sensor
Digital Turbidity Meter
Accuracy - +/-1.0%fs
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Turbidity Sensor
Self Cleaning Sensor
Digital Turbidity Meter
Accuracy - +/-1.0%fs
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Turbidity Sensor
Self Cleaning Sensor
Digital Turbidity Meter
Accuracy - +/-1.0%fs
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Application - Laboratory
Protection grade - IP65
Medium temperature - 0-50 °C
Size - 242x184x135 mm
Turbidity Sensor
Self Cleaning Sensor
Dissolved Oxyden Analyzers
Polarographic DO Analyzer
Slope adjustment limits - 75 to 140% of nominal slope
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Dissolved Oxygen Sensors
Reference temperature - 25 °C (77 F)
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Electrodes
DO Meter
Polarographic DO Analyzer
Slope adjustment limits - 75 to 140% of nominal slope
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Dissolved Oxygen Sensors
Reference temperature - 25 °C (77 F)
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Electrodes
DO Meter
Polarographic DO Analyzer
Slope adjustment limits - 75 to 140% of nominal slope
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Dissolved Oxygen Sensors
Reference temperature - 25 °C (77 F)
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Electrodes
DO Meter
Polarographic DO Analyzer
Slope adjustment limits - 75 to 140% of nominal slope
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Dissolved Oxygen Sensors
Reference temperature - 25 °C (77 F)
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Electrodes
DO Meter
Polarographic DO Analyzer
Slope adjustment limits - 75 to 140% of nominal slope
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Dissolved Oxygen Sensors
Reference temperature - 25 °C (77 F)
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Electrodes
DO Meter
Polarographic DO Analyzer
Slope adjustment limits - 75 to 140% of nominal slope
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Dissolved Oxygen Sensors
Reference temperature - 25 °C (77 F)
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Electrodes
DO Meter
Polarographic DO Analyzer
Slope adjustment limits - 75 to 140% of nominal slope
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Dissolved Oxygen Sensors
Reference temperature - 25 °C (77 F)
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Electrodes
DO Meter
Polarographic DO Analyzer
Slope adjustment limits - 75 to 140% of nominal slope
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Voltage - 10 to 50 V
Current consumption - Max. 10 mA
Pressure compensation range - 500 to 1100 hPa
Altitude adjustment range - 0 to 4000 m / 13120 ft
Dimensions of panel mounted unit - 96 x 96 x 145 mm
Dissolved Oxygen Sensors
Reference temperature - 25 °C (77 F)
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Reference pressure - 1013 hPa (15 psi)
Repeatability - +/-1 % of the measuring range end
Ambient temperature range - -5 to +135 °C (23 to 175 F)
Ingress protection - IP68
Electrodes
DO Meter
Conductivity/TDS Sensor
KI10 Industrial Sensor
Range - 0-200 mS
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Pressure - 100 psi
Cable Length - 5 m
Body Material - Glass
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Pressure - 100 psi
Cable Length - 5 m
Body Material - Glass
K 10 Laboratory Sensor
Range - 0-50 mS
Cable Length - 1 m
Body Material - Glass
Brand - SENTEK
Shaft Diameter - 6 mm
Shaft Length - 120 mm
Temperature range - 0-100 °C
Cable Length - 1 m
Body Material - Glass
Brand - SENTEK
Shaft Diameter - 6 mm
Shaft Length - 120 mm
Temperature range - 0-100 °C
Digital Conductivity And TDS Meter
Weight - 650 Grams (Excluding batteries)
Power Supply - 6 AA Batteries or 115/230 V AC adapter
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Dimensions - 165 x 230 x 80 mm
Power Supply - 6 AA Batteries or 115/230 V AC adapter
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Dimensions - 165 x 230 x 80 mm
Toroidal Conductivity Sensor
Cell Constant - Approximately 2 cm -1
Measuring range - 0 - 2000 mS/cm
Temperature sensor - Pt100 RTD
Operating temperature range - -20 to 180 °C (-4 to 356 Deg F)
Measuring range - 0 - 2000 mS/cm
Temperature sensor - Pt100 RTD
Operating temperature range - -20 to 180 °C (-4 to 356 Deg F)
Industrial Conductivity Sensor
Insulation - PEEK (FDA acceptable)
Cell constant k - 0.1/cm
Temperature sensor - Pt100 or Pt1000 RTD
Sanitary clamp - 1", 1.5", 2" Tri-clamp
Electrode - Polished 316L Stainless Steel
Seal - Flat seal EPDM (FDA acceptable)
Max pressure - 12 bar at 20 °C (175 psig at 68 Deg F)
Cell constant k - 0.1/cm
Temperature sensor - Pt100 or Pt1000 RTD
Sanitary clamp - 1", 1.5", 2" Tri-clamp
Electrode - Polished 316L Stainless Steel
Seal - Flat seal EPDM (FDA acceptable)
Max pressure - 12 bar at 20 °C (175 psig at 68 Deg F)
12 mm Laboratory Sensor
Range - 0-150 mS
Cable Length - 1 m
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Shaft Diameter - 12 mm
Body Material - Glass
Cable Length - 1 m
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Shaft Diameter - 12 mm
Body Material - Glass
Pocket TDS Meter
Measure Range - 0.000 to 9999uS/cm
Temperature Range - 10-90 °C
Weight - 260 Grams (Batteries included)
Cell Constant K=0.1,1.0,10.0
Reference Temperature - 15.0 to 25.0 °C
Power - 9 Volt Battery
Temperature Coefficient - 0.0% to 4.0%
Salinity - 0.0 to 70.0ppt
Protection Grade - IP65
Dimensions - 70 x 198 x 37 mm
Temperature Range - 10-90 °C
Weight - 260 Grams (Batteries included)
Cell Constant K=0.1,1.0,10.0
Reference Temperature - 15.0 to 25.0 °C
Power - 9 Volt Battery
Temperature Coefficient - 0.0% to 4.0%
Salinity - 0.0 to 70.0ppt
Protection Grade - IP65
Dimensions - 70 x 198 x 37 mm
KI10 Industrial Sensor
Range - 0-200 mS
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Pressure - 100 psi
Cable Length - 5 m
Body Material - Glass
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Pressure - 100 psi
Cable Length - 5 m
Body Material - Glass
K 10 Laboratory Sensor
Range - 0-50 mS
Cable Length - 1 m
Body Material - Glass
Brand - SENTEK
Shaft Diameter - 6 mm
Shaft Length - 120 mm
Temperature range - 0-100 °C
Cable Length - 1 m
Body Material - Glass
Brand - SENTEK
Shaft Diameter - 6 mm
Shaft Length - 120 mm
Temperature range - 0-100 °C
Digital Conductivity And TDS Meter
Weight - 650 Grams (Excluding batteries)
Power Supply - 6 AA Batteries or 115/230 V AC adapter
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Dimensions - 165 x 230 x 80 mm
Power Supply - 6 AA Batteries or 115/230 V AC adapter
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Dimensions - 165 x 230 x 80 mm
Toroidal Conductivity Sensor
Cell Constant - Approximately 2 cm -1
Measuring range - 0 - 2000 mS/cm
Temperature sensor - Pt100 RTD
Operating temperature range - -20 to 180 °C (-4 to 356 Deg F)
Measuring range - 0 - 2000 mS/cm
Temperature sensor - Pt100 RTD
Operating temperature range - -20 to 180 °C (-4 to 356 Deg F)
Industrial Conductivity Sensor
Insulation - PEEK (FDA acceptable)
Cell constant k - 0.1/cm
Temperature sensor - Pt100 or Pt1000 RTD
Sanitary clamp - 1", 1.5", 2" Tri-clamp
Electrode - Polished 316L Stainless Steel
Seal - Flat seal EPDM (FDA acceptable)
Max pressure - 12 bar at 20 °C (175 psig at 68 Deg F)
Cell constant k - 0.1/cm
Temperature sensor - Pt100 or Pt1000 RTD
Sanitary clamp - 1", 1.5", 2" Tri-clamp
Electrode - Polished 316L Stainless Steel
Seal - Flat seal EPDM (FDA acceptable)
Max pressure - 12 bar at 20 °C (175 psig at 68 Deg F)
12 mm Laboratory Sensor
Range - 0-150 mS
Cable Length - 1 m
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Shaft Diameter - 12 mm
Body Material - Glass
Cable Length - 1 m
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Shaft Diameter - 12 mm
Body Material - Glass
Pocket TDS Meter
Measure Range - 0.000 to 9999uS/cm
Temperature Range - 10-90 °C
Weight - 260 Grams (Batteries included)
Cell Constant K=0.1,1.0,10.0
Reference Temperature - 15.0 to 25.0 °C
Power - 9 Volt Battery
Temperature Coefficient - 0.0% to 4.0%
Salinity - 0.0 to 70.0ppt
Protection Grade - IP65
Dimensions - 70 x 198 x 37 mm
Temperature Range - 10-90 °C
Weight - 260 Grams (Batteries included)
Cell Constant K=0.1,1.0,10.0
Reference Temperature - 15.0 to 25.0 °C
Power - 9 Volt Battery
Temperature Coefficient - 0.0% to 4.0%
Salinity - 0.0 to 70.0ppt
Protection Grade - IP65
Dimensions - 70 x 198 x 37 mm
KI10 Industrial Sensor
Range - 0-200 mS
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Pressure - 100 psi
Cable Length - 5 m
Body Material - Glass
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Pressure - 100 psi
Cable Length - 5 m
Body Material - Glass
K 10 Laboratory Sensor
Range - 0-50 mS
Cable Length - 1 m
Body Material - Glass
Brand - SENTEK
Shaft Diameter - 6 mm
Shaft Length - 120 mm
Temperature range - 0-100 °C
Cable Length - 1 m
Body Material - Glass
Brand - SENTEK
Shaft Diameter - 6 mm
Shaft Length - 120 mm
Temperature range - 0-100 °C
Digital Conductivity And TDS Meter
Weight - 650 Grams (Excluding batteries)
Power Supply - 6 AA Batteries or 115/230 V AC adapter
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Dimensions - 165 x 230 x 80 mm
Power Supply - 6 AA Batteries or 115/230 V AC adapter
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Dimensions - 165 x 230 x 80 mm
Toroidal Conductivity Sensor
Cell Constant - Approximately 2 cm -1
Measuring range - 0 - 2000 mS/cm
Temperature sensor - Pt100 RTD
Operating temperature range - -20 to 180 °C (-4 to 356 Deg F)
Measuring range - 0 - 2000 mS/cm
Temperature sensor - Pt100 RTD
Operating temperature range - -20 to 180 °C (-4 to 356 Deg F)
Industrial Conductivity Sensor
Insulation - PEEK (FDA acceptable)
Cell constant k - 0.1/cm
Temperature sensor - Pt100 or Pt1000 RTD
Sanitary clamp - 1", 1.5", 2" Tri-clamp
Electrode - Polished 316L Stainless Steel
Seal - Flat seal EPDM (FDA acceptable)
Max pressure - 12 bar at 20 °C (175 psig at 68 Deg F)
Cell constant k - 0.1/cm
Temperature sensor - Pt100 or Pt1000 RTD
Sanitary clamp - 1", 1.5", 2" Tri-clamp
Electrode - Polished 316L Stainless Steel
Seal - Flat seal EPDM (FDA acceptable)
Max pressure - 12 bar at 20 °C (175 psig at 68 Deg F)
12 mm Laboratory Sensor
Range - 0-150 mS
Cable Length - 1 m
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Shaft Diameter - 12 mm
Body Material - Glass
Cable Length - 1 m
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Shaft Diameter - 12 mm
Body Material - Glass
Pocket TDS Meter
Measure Range - 0.000 to 9999uS/cm
Temperature Range - 10-90 °C
Weight - 260 Grams (Batteries included)
Cell Constant K=0.1,1.0,10.0
Reference Temperature - 15.0 to 25.0 °C
Power - 9 Volt Battery
Temperature Coefficient - 0.0% to 4.0%
Salinity - 0.0 to 70.0ppt
Protection Grade - IP65
Dimensions - 70 x 198 x 37 mm
Temperature Range - 10-90 °C
Weight - 260 Grams (Batteries included)
Cell Constant K=0.1,1.0,10.0
Reference Temperature - 15.0 to 25.0 °C
Power - 9 Volt Battery
Temperature Coefficient - 0.0% to 4.0%
Salinity - 0.0 to 70.0ppt
Protection Grade - IP65
Dimensions - 70 x 198 x 37 mm
KI10 Industrial Sensor
Range - 0-200 mS
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Pressure - 100 psi
Cable Length - 5 m
Body Material - Glass
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Pressure - 100 psi
Cable Length - 5 m
Body Material - Glass
K 10 Laboratory Sensor
Range - 0-50 mS
Cable Length - 1 m
Body Material - Glass
Brand - SENTEK
Shaft Diameter - 6 mm
Shaft Length - 120 mm
Temperature range - 0-100 °C
Cable Length - 1 m
Body Material - Glass
Brand - SENTEK
Shaft Diameter - 6 mm
Shaft Length - 120 mm
Temperature range - 0-100 °C
Digital Conductivity And TDS Meter
Weight - 650 Grams (Excluding batteries)
Power Supply - 6 AA Batteries or 115/230 V AC adapter
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Dimensions - 165 x 230 x 80 mm
Power Supply - 6 AA Batteries or 115/230 V AC adapter
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Dimensions - 165 x 230 x 80 mm
Toroidal Conductivity Sensor
Cell Constant - Approximately 2 cm -1
Measuring range - 0 - 2000 mS/cm
Temperature sensor - Pt100 RTD
Operating temperature range - -20 to 180 °C (-4 to 356 Deg F)
Measuring range - 0 - 2000 mS/cm
Temperature sensor - Pt100 RTD
Operating temperature range - -20 to 180 °C (-4 to 356 Deg F)
Industrial Conductivity Sensor
Insulation - PEEK (FDA acceptable)
Cell constant k - 0.1/cm
Temperature sensor - Pt100 or Pt1000 RTD
Sanitary clamp - 1", 1.5", 2" Tri-clamp
Electrode - Polished 316L Stainless Steel
Seal - Flat seal EPDM (FDA acceptable)
Max pressure - 12 bar at 20 °C (175 psig at 68 Deg F)
Cell constant k - 0.1/cm
Temperature sensor - Pt100 or Pt1000 RTD
Sanitary clamp - 1", 1.5", 2" Tri-clamp
Electrode - Polished 316L Stainless Steel
Seal - Flat seal EPDM (FDA acceptable)
Max pressure - 12 bar at 20 °C (175 psig at 68 Deg F)
12 mm Laboratory Sensor
Range - 0-150 mS
Cable Length - 1 m
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Shaft Diameter - 12 mm
Body Material - Glass
Cable Length - 1 m
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Shaft Diameter - 12 mm
Body Material - Glass
Pocket TDS Meter
Measure Range - 0.000 to 9999uS/cm
Temperature Range - 10-90 °C
Weight - 260 Grams (Batteries included)
Cell Constant K=0.1,1.0,10.0
Reference Temperature - 15.0 to 25.0 °C
Power - 9 Volt Battery
Temperature Coefficient - 0.0% to 4.0%
Salinity - 0.0 to 70.0ppt
Protection Grade - IP65
Dimensions - 70 x 198 x 37 mm
Temperature Range - 10-90 °C
Weight - 260 Grams (Batteries included)
Cell Constant K=0.1,1.0,10.0
Reference Temperature - 15.0 to 25.0 °C
Power - 9 Volt Battery
Temperature Coefficient - 0.0% to 4.0%
Salinity - 0.0 to 70.0ppt
Protection Grade - IP65
Dimensions - 70 x 198 x 37 mm
KI10 Industrial Sensor
Range - 0-200 mS
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Pressure - 100 psi
Cable Length - 5 m
Body Material - Glass
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Pressure - 100 psi
Cable Length - 5 m
Body Material - Glass
K 10 Laboratory Sensor
Range - 0-50 mS
Cable Length - 1 m
Body Material - Glass
Brand - SENTEK
Shaft Diameter - 6 mm
Shaft Length - 120 mm
Temperature range - 0-100 °C
Cable Length - 1 m
Body Material - Glass
Brand - SENTEK
Shaft Diameter - 6 mm
Shaft Length - 120 mm
Temperature range - 0-100 °C
Digital Conductivity And TDS Meter
Weight - 650 Grams (Excluding batteries)
Power Supply - 6 AA Batteries or 115/230 V AC adapter
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Dimensions - 165 x 230 x 80 mm
Power Supply - 6 AA Batteries or 115/230 V AC adapter
LCD Character Size - 16-21 mm
Ambient Temp Range - 0 to 50 °C
Dimensions - 165 x 230 x 80 mm
Toroidal Conductivity Sensor
Cell Constant - Approximately 2 cm -1
Measuring range - 0 - 2000 mS/cm
Temperature sensor - Pt100 RTD
Operating temperature range - -20 to 180 °C (-4 to 356 Deg F)
Measuring range - 0 - 2000 mS/cm
Temperature sensor - Pt100 RTD
Operating temperature range - -20 to 180 °C (-4 to 356 Deg F)
Industrial Conductivity Sensor
Insulation - PEEK (FDA acceptable)
Cell constant k - 0.1/cm
Temperature sensor - Pt100 or Pt1000 RTD
Sanitary clamp - 1", 1.5", 2" Tri-clamp
Electrode - Polished 316L Stainless Steel
Seal - Flat seal EPDM (FDA acceptable)
Max pressure - 12 bar at 20 °C (175 psig at 68 Deg F)
Cell constant k - 0.1/cm
Temperature sensor - Pt100 or Pt1000 RTD
Sanitary clamp - 1", 1.5", 2" Tri-clamp
Electrode - Polished 316L Stainless Steel
Seal - Flat seal EPDM (FDA acceptable)
Max pressure - 12 bar at 20 °C (175 psig at 68 Deg F)
12 mm Laboratory Sensor
Range - 0-150 mS
Cable Length - 1 m
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Shaft Diameter - 12 mm
Body Material - Glass
Cable Length - 1 m
Temperature range - 0-100 °C
Shaft Length - 120 mm +/-2 mm
Shaft Diameter - 12 mm
Body Material - Glass
Pocket TDS Meter
Measure Range - 0.000 to 9999uS/cm
Temperature Range - 10-90 °C
Weight - 260 Grams (Batteries included)
Cell Constant K=0.1,1.0,10.0
Reference Temperature - 15.0 to 25.0 °C
Power - 9 Volt Battery
Temperature Coefficient - 0.0% to 4.0%
Salinity - 0.0 to 70.0ppt
Protection Grade - IP65
Dimensions - 70 x 198 x 37 mm
Temperature Range - 10-90 °C
Weight - 260 Grams (Batteries included)
Cell Constant K=0.1,1.0,10.0
Reference Temperature - 15.0 to 25.0 °C
Power - 9 Volt Battery
Temperature Coefficient - 0.0% to 4.0%
Salinity - 0.0 to 70.0ppt
Protection Grade - IP65
Dimensions - 70 x 198 x 37 mm
Chlorine/Chlorine Dioxide
Chlorine Dioxide Sensor
pH Range - 4-11 pH
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Cable Length - 10 feet 2 conductors, tinned leads
Supply Voltage - 12-24 V DC
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Cable Length - 10 feet 2 conductors, tinned leads
Supply Voltage - 12-24 V DC
Chlorine Sensor
Cable Length - 10 feet 2 conductors, tinned leads
Brand - Sensorex
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Measuring Range - 0-2, 0-5 or 0-10 ppm free chlorine
pH Range - 5.5 - 8.5 pH
Brand - Sensorex
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Measuring Range - 0-2, 0-5 or 0-10 ppm free chlorine
pH Range - 5.5 - 8.5 pH
Chlorine Meter
Storage temperature - 40 to 80 °C (-40 to 175 Deg F)
Ingress protection - IP67 (similar to NEMA 4X)
Relative humidity - 10 to 95%, not condensing
Ambient temperature limits - 30 to +80 °C (-20 to 175 Deg F)
Ingress protection - IP67 (similar to NEMA 4X)
Relative humidity - 10 to 95%, not condensing
Ambient temperature limits - 30 to +80 °C (-20 to 175 Deg F)
Chlorine Analyzer
Chlorine Sensor Housing
Electrodes installed Size - 85 x 85 x 250 mm (3.35 x 3.35 x 9.84 Inch)
Measuring Cell Body - Plexiglass,PVC,stainless steel,EPDM
Max permissible water back pressure - 1 bar (14 psig)
Max operating temperature - 45 °C (113 Deg F)
Measuring Cell Body - Plexiglass,PVC,stainless steel,EPDM
Max permissible water back pressure - 1 bar (14 psig)
Max operating temperature - 45 °C (113 Deg F)
Chlorine Dioxide Sensor
pH Range - 4-11 pH
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Cable Length - 10 feet 2 conductors, tinned leads
Supply Voltage - 12-24 V DC
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Cable Length - 10 feet 2 conductors, tinned leads
Supply Voltage - 12-24 V DC
Chlorine Sensor
Cable Length - 10 feet 2 conductors, tinned leads
Brand - Sensorex
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Measuring Range - 0-2, 0-5 or 0-10 ppm free chlorine
pH Range - 5.5 - 8.5 pH
Brand - Sensorex
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Measuring Range - 0-2, 0-5 or 0-10 ppm free chlorine
pH Range - 5.5 - 8.5 pH
Chlorine Meter
Storage temperature - 40 to 80 °C (-40 to 175 Deg F)
Ingress protection - IP67 (similar to NEMA 4X)
Relative humidity - 10 to 95%, not condensing
Ambient temperature limits - 30 to +80 °C (-20 to 175 Deg F)
Ingress protection - IP67 (similar to NEMA 4X)
Relative humidity - 10 to 95%, not condensing
Ambient temperature limits - 30 to +80 °C (-20 to 175 Deg F)
Chlorine Analyzer
Chlorine Sensor Housing
Electrodes installed Size - 85 x 85 x 250 mm (3.35 x 3.35 x 9.84 Inch)
Measuring Cell Body - Plexiglass,PVC,stainless steel,EPDM
Max permissible water back pressure - 1 bar (14 psig)
Max operating temperature - 45 °C (113 Deg F)
Measuring Cell Body - Plexiglass,PVC,stainless steel,EPDM
Max permissible water back pressure - 1 bar (14 psig)
Max operating temperature - 45 °C (113 Deg F)
Chlorine Dioxide Sensor
pH Range - 4-11 pH
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Cable Length - 10 feet 2 conductors, tinned leads
Supply Voltage - 12-24 V DC
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Cable Length - 10 feet 2 conductors, tinned leads
Supply Voltage - 12-24 V DC
Chlorine Sensor
Cable Length - 10 feet 2 conductors, tinned leads
Brand - Sensorex
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Measuring Range - 0-2, 0-5 or 0-10 ppm free chlorine
pH Range - 5.5 - 8.5 pH
Brand - Sensorex
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Measuring Range - 0-2, 0-5 or 0-10 ppm free chlorine
pH Range - 5.5 - 8.5 pH
Chlorine Meter
Storage temperature - 40 to 80 °C (-40 to 175 Deg F)
Ingress protection - IP67 (similar to NEMA 4X)
Relative humidity - 10 to 95%, not condensing
Ambient temperature limits - 30 to +80 °C (-20 to 175 Deg F)
Ingress protection - IP67 (similar to NEMA 4X)
Relative humidity - 10 to 95%, not condensing
Ambient temperature limits - 30 to +80 °C (-20 to 175 Deg F)
Chlorine Analyzer
Chlorine Sensor Housing
Electrodes installed Size - 85 x 85 x 250 mm (3.35 x 3.35 x 9.84 Inch)
Measuring Cell Body - Plexiglass,PVC,stainless steel,EPDM
Max permissible water back pressure - 1 bar (14 psig)
Max operating temperature - 45 °C (113 Deg F)
Measuring Cell Body - Plexiglass,PVC,stainless steel,EPDM
Max permissible water back pressure - 1 bar (14 psig)
Max operating temperature - 45 °C (113 Deg F)
Chlorine Dioxide Sensor
pH Range - 4-11 pH
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Cable Length - 10 feet 2 conductors, tinned leads
Supply Voltage - 12-24 V DC
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Cable Length - 10 feet 2 conductors, tinned leads
Supply Voltage - 12-24 V DC
Chlorine Sensor
Cable Length - 10 feet 2 conductors, tinned leads
Brand - Sensorex
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Measuring Range - 0-2, 0-5 or 0-10 ppm free chlorine
pH Range - 5.5 - 8.5 pH
Brand - Sensorex
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Measuring Range - 0-2, 0-5 or 0-10 ppm free chlorine
pH Range - 5.5 - 8.5 pH
Chlorine Meter
Storage temperature - 40 to 80 °C (-40 to 175 Deg F)
Ingress protection - IP67 (similar to NEMA 4X)
Relative humidity - 10 to 95%, not condensing
Ambient temperature limits - 30 to +80 °C (-20 to 175 Deg F)
Ingress protection - IP67 (similar to NEMA 4X)
Relative humidity - 10 to 95%, not condensing
Ambient temperature limits - 30 to +80 °C (-20 to 175 Deg F)
Chlorine Analyzer
Chlorine Sensor Housing
Electrodes installed Size - 85 x 85 x 250 mm (3.35 x 3.35 x 9.84 Inch)
Measuring Cell Body - Plexiglass,PVC,stainless steel,EPDM
Max permissible water back pressure - 1 bar (14 psig)
Max operating temperature - 45 °C (113 Deg F)
Measuring Cell Body - Plexiglass,PVC,stainless steel,EPDM
Max permissible water back pressure - 1 bar (14 psig)
Max operating temperature - 45 °C (113 Deg F)
Chlorine Dioxide Sensor
pH Range - 4-11 pH
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Cable Length - 10 feet 2 conductors, tinned leads
Supply Voltage - 12-24 V DC
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Cable Length - 10 feet 2 conductors, tinned leads
Supply Voltage - 12-24 V DC
Chlorine Sensor
Cable Length - 10 feet 2 conductors, tinned leads
Brand - Sensorex
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Measuring Range - 0-2, 0-5 or 0-10 ppm free chlorine
pH Range - 5.5 - 8.5 pH
Brand - Sensorex
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Measuring Range - 0-2, 0-5 or 0-10 ppm free chlorine
pH Range - 5.5 - 8.5 pH
Chlorine Meter
Storage temperature - 40 to 80 °C (-40 to 175 Deg F)
Ingress protection - IP67 (similar to NEMA 4X)
Relative humidity - 10 to 95%, not condensing
Ambient temperature limits - 30 to +80 °C (-20 to 175 Deg F)
Ingress protection - IP67 (similar to NEMA 4X)
Relative humidity - 10 to 95%, not condensing
Ambient temperature limits - 30 to +80 °C (-20 to 175 Deg F)
Chlorine Analyzer
Chlorine Sensor Housing
Electrodes installed Size - 85 x 85 x 250 mm (3.35 x 3.35 x 9.84 Inch)
Measuring Cell Body - Plexiglass,PVC,stainless steel,EPDM
Max permissible water back pressure - 1 bar (14 psig)
Max operating temperature - 45 °C (113 Deg F)
Measuring Cell Body - Plexiglass,PVC,stainless steel,EPDM
Max permissible water back pressure - 1 bar (14 psig)
Max operating temperature - 45 °C (113 Deg F)
Chlorine Dioxide Sensor
pH Range - 4-11 pH
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Cable Length - 10 feet 2 conductors, tinned leads
Supply Voltage - 12-24 V DC
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Cable Length - 10 feet 2 conductors, tinned leads
Supply Voltage - 12-24 V DC
Chlorine Sensor
Cable Length - 10 feet 2 conductors, tinned leads
Brand - Sensorex
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Measuring Range - 0-2, 0-5 or 0-10 ppm free chlorine
pH Range - 5.5 - 8.5 pH
Brand - Sensorex
Body Material - PVC
Temperature Range - 0 - 45 °C
Maximum Pressure - 14.7 psig (1 Bar)
Measuring Range - 0-2, 0-5 or 0-10 ppm free chlorine
pH Range - 5.5 - 8.5 pH
Chlorine Meter
Storage temperature - 40 to 80 °C (-40 to 175 Deg F)
Ingress protection - IP67 (similar to NEMA 4X)
Relative humidity - 10 to 95%, not condensing
Ambient temperature limits - 30 to +80 °C (-20 to 175 Deg F)
Ingress protection - IP67 (similar to NEMA 4X)
Relative humidity - 10 to 95%, not condensing
Ambient temperature limits - 30 to +80 °C (-20 to 175 Deg F)
Chlorine Analyzer
Chlorine Sensor Housing
Electrodes installed Size - 85 x 85 x 250 mm (3.35 x 3.35 x 9.84 Inch)
Measuring Cell Body - Plexiglass,PVC,stainless steel,EPDM
Max permissible water back pressure - 1 bar (14 psig)
Max operating temperature - 45 °C (113 Deg F)
Measuring Cell Body - Plexiglass,PVC,stainless steel,EPDM
Max permissible water back pressure - 1 bar (14 psig)
Max operating temperature - 45 °C (113 Deg F)
Ion Selective Electrodes
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ion Selective Electrode
Dimensions - 120x12 mm
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Temperature Range - 0 to 50 °C
Maximum length - 10 Meters
pH Range - 0 to 8.5 pH
Brand - SENTEK
Portable Meter
Weight - 325g (without batteries)
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
Ph Range - -2.000 ~ 19.999 pH
Size - 220 x 90 x 45 mm
Data Memory - 200 GLP
Protection grade - IP67
Temperature range - -5.0 ~ 130.0 °C
Power requirements - 4 AA batteries 1.5V or NiMH accumulators 1.3V
UV Analyzer & Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
UV Analyzer
UV Sensor
BOD/COD/Suspended Solids
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
BOD/COD Analyzer
Suspended Solids Analyzer
bottom of page